星载激光通信终端在轨机动对温度影响

对激光通信终端在轨瞬态温度变化开展了仿真，以期研究在轨机动的影响、热分析和热试验时机动模式的简化模拟。通过合理地分析与简化，建立终端的轨道热分析模型，准确模拟在轨机动，根据典型机动模式、外热流和涂层退化等因素设计了计算工况，得出了终端在轨运行过程中的温度场随时间和姿态变化规律。结果表明：不同机动模式下的温度变化存在差异，最大可达23.0℃，采用固定姿态或一维转动的简化热分析或热试验不能准确模拟实际飞行温度，甚至不能部分替代二维转动热分析或热试验；光学天线和反射镜的温度控制是制约终端工作的瓶颈，为终端设计合适的避光机动策略，可大幅度提高温度稳定度和均匀度。研究结果可以为光机电设备在轨机动策略的设计和改进提供参考。     

Impact of rain on wave retrieval from Sentinel-1 synthetic aperture radar images in tropical cyclones

The main objective of our work was to investigate the impact of rain on wave observations from C-band (~5.3 GHz) synthetic aperture radar (SAR) in tropical cyclones. In this study, 10 Sentinel-1 SAR images were available from the Satellite Hurricane Observation Campaign, which were taken under cyclonic conditions during the 2016 hurricane season. The third-generation wave model, known as Simulating WAves Nearshore (SWAN) (version 41.31), was used to simulate the wave fields corresponding to these Sentinel-1 SAR images. In addition, rainfall data from the Tropical Rainfall Measuring Mission satellite passing over the spatial coverage of the Sentinel-1 SAR images were collected. The simulated results were validated against significant wave heights (SWHs) from the Jason-2 altimeter and European Centre for Medium-Range Weather Forecasts data, revealing a root mean square error (RMSE) of ~0.5 m with a 0.25 scatter index. Winds retrieved from the VH-polarized Sentinel-1 SAR images using the Sentinel-1 Extra Wide-swath Mode Wind Speed Retrieval Model after Noise Removal were taken as prior information for wave retrieval. It was discovered that rain did indeed affect the SAR wave retrieval, as evidenced by the 3.21-m RMSE of SWHs between the SAR images and the SWAN model, which was obtained for the ~1000 match-ups with raindrops. The raindrops dampened the wave retrieval when the rain rate was < ~5 mm/hr; however, they enhanced wave retrieval for higher rain rates. It was also found that the portion of the rain-induced ring wave with a wave number > 0.05 rad/m (~125 m wavelength) was clearly observed in the SAR-derived wave spectra.     

高超声速飞行器再入段LQR自抗扰控制方法设计

针对高超声速飞行器(HSV)再入过程中强非线性、强耦合、气动参数变化剧烈的不确定性的特点，提出一种基于线性二次型调节器(LQR)和自抗扰控制(ADRC)的高超声速飞行器再入段的姿态控制方法。首先，建立高超声速飞行器再入段线性化模型，并采用LQR方法完成了状态反馈控制律设计。然后，结合自抗扰控制技术，设计了扩张状态观测器(ESO)对系统的模型不确定性和外部干扰进行补偿，大幅增强了系统的扰动抑制能力。最后，将得到的高超声速飞行器再入段LQR自抗扰姿态控制器(LQRADRC)应用于高超声速飞行器六自由度仿真，仿真结果表明本文所提出的控制方法能够快速、精确地跟踪角位置指令，并且对系统不确定性具有强鲁棒性。     

一种应用于超小型无人机的新型定高传感器

使用美国ICSENSOR公司的压阻硅式绝压传感器，对静压进行测量，并设计出适合超小型无人机使用的新型定高传感器，这种定高传感器具有灵敏度高，重量轻，单电源供电，板式结构。可靠性高，重复性好的特点，填补了应用于超小型无人机的定高传感器产品的空白。     

死亡是生命的必然归宿

本文根据物质系统演化的规律，平衡原理及熵理论，阐述了死亡是生命系统演化的必然归宿。     

基于信息流电路可测试性的度量

准确地度量电路的可测试性是数字系统测试的重要问题之一。本文提出了一种基于信息流度量电路可测试性的方法,它表明可以将一个数字电路看成是一个信息处理系统。因此,电路的可测试性的度量值定义为电路输出的平均信息量与输入的平均信息量的最大值之比。文中给出了如何应用逻辑模拟软件来计算电路可测试性的度量值。对于由模块组成的电路,可以通过模块之间的一些特殊操作求得整个电路可测试性的度量值,本文也给出了方法及实例。文中还给出了应用本文提出的方法进行电路可测试性度量的实例,并与文[1,5]的方法得到的结果进行了比较,从而说明了本文方法的特点。     

传输型光学遥感器斜模式采样新方法研究

文章介绍了实现超模式采样焦平面3种解决方案面临的技术难点，为避开器件问题提出了一种新的斜模式采样方法。以任意两维周期采样理论为基础分析了斜模式采样技术的物理原理，并通过实验手段验证了斜模式采样技术的可行性。试验结果表明：改变探测器推扫方向的采样间距符模式采样技术可以提高传输型光学遥感器图像的空间分辨率，该技术相对于超模式采样技术，工程实现上要简单。     

POGO蓄压器变频降幅特性分析

论述纵向耦合振动（POGO）蓄压器的变频降幅特性，指出其主要影响因素是蓄压器容积及连接管路的液阻，根据输送管路的特定频率，选择适当的蓄压器容积，使其固有频率与特定管路的压力脉动频率相一致，可以获得预期的变频降幅效果。给出了蓄压器的变频降幅试验研究结果，可为POGO蓄压器的设计，研制，使得提供参考。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.